1 What you need
- A Mac (Apple Silicon or Intel) or a 64-bit Windows PC.
- An audio interface with an instrument (Hi-Z) input, connected over USB or Thunderbolt.
- A guitar and an instrument cable (a standard 1/4" jack cable).
- Headphones or studio monitors connected to your audio interface.
- A DAW (optional). The Mayerism Pro app plays without one.
Audio Unit Mac
Logic Pro, GarageBand, MainStage
VST3 Mac & Windows
Ableton Live, Cubase, Studio One, Reaper, Bitwig, FL Studio, Cakewalk, Reason 12.5 and later
App Mac & Windows
The Mayerism Pro app: play without a DAW
Pro Tools isn't supported: it only loads AAX plug-ins.
2 Install
Close your DAW first, then run the installer for your computer. It installs every format at once.
Mac
- Open the
.pkgfile and click Continue through the pages. - Enter your Mac's password when asked.
- When it says Mayerism Pro is installed, you're done.
Installed to:
- App
/Applications - Audio Unit
/Library/Audio/Plug-Ins/Components - VST3
/Library/Audio/Plug-Ins/VST3
Windows
- Run the
.exeinstaller and click Next through the pages. - Optionally tick Create a desktop shortcut.
- On the last page you can open the app straight away.
Installed to:
- App
C:\Program Files\Mayerism Pro - VST3
C:\Program Files\Common Files\VST3
The app and this guide are also in the Start menu.
3 Connect your guitar
- Plug in. Connect your guitar to the audio interface's instrument input with your jack cable, and connect the interface to your computer with the USB or Thunderbolt cable it came with. Plug your headphones or monitors into the interface.
- Set the input to Instrument. If your interface has an Inst, Hi-Zor Line/Inst switch for that input, set it to instrument, not mic or line.
- Set the input gain. Start with the gain knob all the way down and your guitar's volume all the way up. Play as hard as you normally would and raise the gain until the signal is strong but never clips: a red light on the interface means it's too hot.
- Turn off direct monitoring. If your interface has a Direct Monitorswitch or mix knob, turn it off. Otherwise you hear your dry guitar alongside Mayerism Pro.
On Windows, install your interface's driver from the manufacturer's website. Your DAW will need its ASIO driver.
4 Play in the Mayerism Pro app
The app is the quickest way to start playing: no DAW, no tracks to set up.
- Open Mayerism Pro from Applications (Mac) or the Start menu (Windows).
- Mac only: allow input access. macOS asks whether Mayerism Pro may use the microphone. Click Allow: macOS calls every input a microphone, your audio interface's too. If you clicked Don't Allow, the gear button shows an orange dot. Open System Settings > Privacy & Security > Microphone, switch Mayerism Pro on and reopen the app.
- Open the audio settings with the gear button at the bottom left, next to the tuner, and set:
- outputYour audio interface.
- inputYour audio interface.
- input channelThe input your guitar is plugged into. An interface's instrument input is often Input 2. The light beside it turns green when it hears your guitar (orange means it's clipping: lower the interface's gain).
- sample rate48000 Hz.
- buffer size128 samples (256 on older computers). Raise it if you hear crackles.
- Switch off "mute input". It's on the first time you open the app, so the computer's microphone can't cause howling feedback through your speakers. With headphones or an interface, switch it off to hear your guitar.
- Play. Changes apply at once and the app remembers them.
5 Use it in your DAW
- Set up your DAW's audio. In your DAW's audio preferences, choose your audio interface for input and output. On Windows, choose its ASIO driver. Set the buffer size to 128 samples (256 on older computers) and the sample rate to 48000 Hz.
- Reopen your DAW so it finds Mayerism Pro.
- Logic Pro / GarageBandAudio Units > Tim Pelser > Mayerism Pro.
- Ableton LiveSettings > Plug-Ins: turn on Use VST3 Plug-in System Folders.
- FL StudioOptions > Manage plugins > Find installed plugins.
- Other DAWsLook under VST3 plug-ins; if it's missing, rescan your plug-ins.
- Create a mono audio track and set its input to the input your guitar is plugged into.
- Insert Mayerism Pro as the first effect on that track.
- Turn on input monitoring (and record-arm the track if your DAW needs it to hear the input). Now play.
The Doubler needs a stereo output. On a mono track most DAWs give Mayerism Pro a stereo output automatically. In Logic Pro, choose Mono → Stereo when you insert it. If the DOUBLER knob is greyed out, the plug-in is running in mono.
6 Presets
- Load: click the preset name at the top to open the list, or step through presets with the arrows.
- Save: click SAVE, type a name and press Enter. Your presets appear in the User folder of the list.
- Share: every preset you save is a
.mayerismpresetfile you can send to someone. To add a preset you received, put the file in the same folder and it shows up in yourUser folder:- Mac
~/Documents/Mayerism Pro/Presets - Windows
Documents\Mayerism Pro\Presets
- Mac
7 Troubleshooting
Mayerism Pro doesn't show up in my DAW
- Quit and reopen your DAW after installing; most DAWs only scan when they start.
- Ableton Live: turn on Use VST3 Plug-in System Folders (Settings > Plug-Ins). FL Studio: run Find installed plugins.
- Logic Pro and GarageBand only load Audio Units: look under Audio Units > Tim Pelser.
- Reason needs version 12.5 or later for VST3. Pro Tools isn't supported.
I don't hear anything
- In the app: switch off mute input in the audio settings (an orange dot on the gear means it's still on).
- Check the input channel: the light beside it should turn green when you play. Try the other input if it doesn't.
- On a Mac, make sure Mayerism Pro is allowed under System Settings > Privacy & Security > Microphone.
- In a DAW: check the track's input, and that input monitoring is on.
- Check the INPUT and OUTPUT knobs at the top, and your interface's volume.
I hear crackles or pops
- Raise the buffer size: try 256, then 512.
- Close other programs that use audio or a lot of processing power.
- On a laptop, plug in the charger and turn off battery-saving modes.
There's a delay between playing and hearing
- Lower the buffer size to 128 samples.
- On Windows, use your interface's ASIO driver in your DAW.
- Avoid Bluetooth headphones and speakers: they add a delay you can't remove.
I hear my clean guitar along with Mayerism Pro
- Turn off your interface's direct monitoring (a switch or a mix knob on the interface).
The sound is distorted or too quiet
- Set your interface's input to Instrument (Hi-Z) and redo the gain: strong, but no red clip light.
- Use the INPUT knob at the top of Mayerism Pro to fine-tune the level going in.
I hear howling feedback
- Your computer's microphone is picking up its own speakers. Use headphones or an audio interface, or switch mute input back on.
Still stuck?
Ask on the helpdesk or email timpelser@outlook.com.